Trimble GCS900 MS992 Dual GPS GNSS Cab Kit

Like new Trimble GCS900 MS992 CB460 3D Automatics Machine Control CAB ACCUGRADE SNR 920. All gears been serviced and calibrated by Trimble Authorized Service Center, performed all firmware and programs updated. Everything is in excellent ready to go to work and works flawlessly with Grader Dozer.

The Trimble CB460 control box loaded with Accugrade 3D Automatic Grader, Dozer, Paver Excavator including automatics. The TRimble SNR920 radio has both 900mhz frequency and 2.4 ghz. The Trimble MS992 Grade Control GPS GLONASS Receivers with Options CMR Inputs, CMR Outputs, RTCM Inputs, JX1100 Radio Driver, Binary Outputs, Moving Base, 10 Hz Measurements, 20 Hz Measurements, Data Logging, 12 Channels, L2CS, L5, GLONASS, Webserver

Complete MS992 GPS/GNSS Dual Receiver Cab Kit includes everything and ready to work;

• 2X Trimble MS992 GPS receiver with Glonass
• 1X Trimble CB460 loaded with Accugrade -3D Automatic Grader, Dozer
• 1X Trimble SNR 920 - 900mhz radio with 2.4ghz
• 2X Masts Poles
• 2X Hard carrying Case

Trimble MS992 GNSS Smart Antenna

The Trimble MS992 GNSS Smart Antenna is smart because it contains an integrated GNSS receiver, antenna, an isolation system in a single, ruggedized housing that can withstand even the toughest construction site environments. It is also the only commercially available GNSS antenna that offers the performance enhancements of a new Trimble RTK engine and supports the newest GNSS signals. All that means increased machine productivity and utilization in areas that were previously difficult to use GPS machine control - including under tree canopy and in urban canyons.

Designed for rugged operation on Trimble GCS900 Grade Control Systems and CCS900 Compaction Control Systems, the MS992 is available in single or dual configurations on the following machine types:

- Dozers
- Graders
- Excavators
- Scrapers
- Pull-type Scrapers
- Soil Compactors
- Asphalt Compactors

Trimble CB460 Control Box

Designed for use with the Trimble GCS900 Grade Control System and CCS900 Compaction Control System, the rugged new LCD display offers several benefits for operators running in 2D or 3D mode. The Trimble CB460 Control Box is the new premium display for the Trimble CCS900 Compaction Control System and the Trimble GCS900 Grade Control System portfolio. It is the replacement for the Trimble CB430 Control Box, which is being discontinued for those applications.

Enhanced Operator Experience on all GCS900 Machine Types

The new Trimble CB460 enhances the operator experience with a large 7” screen display of 3D profile information, grade guidance, and warnings – that is the same size as the older CB430 Control Box and 61% larger than the CB450 Control Box. While maintaining the same display size, the total size of the unit housing is smaller than the Trimble CB430 Control Box, allowing more flexibility with mounting in tight spaces.

Adjustable brightness capability and viewing angle accommodate different operational lighting conditions, while reducing operator fatigue and errors.

The CB460 uses icons for the main guidance softkeys instead of text strings previously used in the Trimble CB430 display. Softkeys are now easier to read and provide a more modern interface for the user.

Four integrated LED lightbars make it simple to monitor grade guidance information while also viewing conditions on the site. The CB460 can also be supplemented with external lightbars.

Create New Designs and Apply the Desired Coordinate System in the Field

Using the CB460, an operator can create new designs (level, slope or map) on the display and define what coordinate system to use with this new design, either the last used coordinate system, a coordinate system located on the displays storage disk or a new coordinate system based on the current location.

This in-field functionality offers several benefits, including:

• The ability to keep horizontal and vertical positions consistent at each site when using designs generated in the field.
• The ability to select which coordinate system to apply. Having the wrong coordinate system loaded even when creating new designs has the potential of giving bad guidance.
• The ability to create infield designs including infield coordinate system definition for use on sites that do not yet have a defined coordinate system

Data Transfer via USB memory stick

The CB460 utilizes internal memory for storing designs, machine files and machine production information. Using any USB memory stick, the user can easily load design files and firmware to the control box, download machine production files and load firmware to the control box. File transfer and archiving rules prevent operators from accidently deleting or overwriting files on the CB460.

USB data transfer also increases compatibility with Trimble Site Positioning System controllers which also have USB ports. This allows for easy data exchange between surveyors, grade checkers, site supervisors and machine operators – e.g. data can be synchronized to a site supervisor who can then rapidly deploy or retrieve data from a Trimble Tablet or TSC3 to or from the machine control system using a USB stick.

Flexible Upgrade Options Make it Easy to Order the Right Level of Functionality

Trimble CB460 Control Box can be configured for different functionality levels, based on the requirements of the customer. Trimble CB460 Control Box requires activation with option keys to enable desired 2D or 3D functionality. In general, the following functionality levels are available through the Trimble Store:

• 2D indicate plus Automatics
• 3D Indicate (includes 2D indicate + Automatics)
• 3D Automatics (includes 3D indicate)

Trimble SNR920 900MHz On Machine Radio for Grade Control Systems

The Trimble SNR920 is a multi-network, 900MHz on machine radio designed specifically for use on grade control system applications for the construction and mining industries. The SNR900 on machine radio has been designed for use within a Trimble GCS900 Grade Control System. It offers outstanding features and benefits for on-machine applications:

• Increased robust power handling allows direct connection to machine power for easier installation and cabling
• Controller Area Network (CAN) communication with the GCS900 system provides a simpler, more reliable system
• Error correction and a high-speed data rate ensures maximum performance
• Designed for reliable operation in demanding RF environments and optimized for GPS with increased sensitivity and jamming immunity

The SNR900 on machine radio can be used as a replacement radio on Trimble SiteVision® systems. This rugged unit is fully sealed against dust, rain, splash, and spray for optimal reliability in all weather conditions to minimize downtime and lower overall operating costs.